Van màng công nghiệp Gemu | Đại lý phân phối van màng Gemu tại Việt Nam

Đại lý phân phối van mang Gemu tại Việt Nam

Van màng cho ứng dụng công nghiệp Gemu

Tổng quan

Tùy thuộc vào phiên bản, van màng GEMÜ đặc biệt phù hợp để sử dụng với cả môi trường trơ ​​và ăn mòn. Chúng có thể được sử dụng để kiểm soát và/hoặc điều chỉnh môi trường lỏng và khí bị ô nhiễm nặng hoặc môi trường chứa các hạt nhỏ. Các lĩnh vực sử dụng chính là các quy trình trong phạm vi rộng nhất của các ứng dụng công nghiệp chung. Các van cũng có thể được trang bị nhiều phụ kiện, chẳng hạn như bộ điều chỉnh phớt và bộ giới hạn hành trình, bộ ghi đè thủ công, công tắc tiệm cận, chỉ báo vị trí quang học, chỉ báo vị trí điện, hộp công tắc kết hợp, van điều khiển, cũng như bộ định vị và bộ điều khiển quy trình.

Các dòng van màng công nghiệp

Van màng GEMÜ 615

• Media temperature :-10 to 80 °C
• Ambient temperature:0 to 60 °C
• Operating pressure :0 to 6 bar
• Nominal sizes:DN 10 to 20
• Body configurations:2/2-way body
• Connection types:Clamp | Spigot | Threaded connection
• Connection standards:ANSI | ASME | BS | DIN | EN | JIS
• Body materials:1.4408, investment casting material | 1.4435 (316L), forged material | 1.4435 (BN2), forged material | 1.4435, investment casting material | 1.4539 (904L), forged material | CW617N, brass
• Diaphragm materials:EPDM | PTFE/EPDM | PTFE/FKM
• Conformities:Belgaqua | CRN | EAC | FDA | Oxygen | TA Luft (German Clean Air Act)

Van màng GEMÜ 620

• Media temperature :0 to 100 °C
• Ambient temperature:0 to 60 °C
• Operating pressure :0 to 10 bar
• Nominal sizes:DN 15 to 150
• Body configurations:2/2-way body
• Connection types:Flange | Threaded connection
• Connection standards:ANSI | BS | EN | ISO
• Body materials:EN-GJL-250, cast iron material | EN-GJS-400-18-LT (GGG 40.3), PFA lined | EN-GJS-400-18-LT (GGG 40.3), PP lined | EN-GJS-400-18-LT, hard rubber lined | EN-GJS-400-18-LT, SG iron material | EN-GJS-500-7, ductile iron material, PFA lined | EN-GJS-500-7, ductile iron material, PP lined
• Body lining:Hard rubber | PFA | PP
• Diaphragm materials:CR | EPDM | FKM | NBR | PTFE/EPDM | PTFE/FKM | PTFE/PVDF/EPDM
• Conformities:CRN | EAC | FDA | TA Luft (German Clean Air Act)

Van màng GEMÜ 655

• Media temperature :0 to 100 °C
• Ambient temperature:0 to 60 °C
• Operating pressure :0 to 10 bar
• Nominal sizes:DN 25 to 300
• Body configurations:2/2-way body
• Connection types:Flange
• Connection standards:ANSI | EN | ISO
• Body materials:EN-GJL-250, cast iron material | EN-GJS-400-18-LT, SG iron material | EN-GJS-500-7, ductile iron material
• Body lining:Butyl | Hard rubber | Soft rubber
• Diaphragm materials:CR | EPDM | IIR | NBR | NR
• Conformities:CRN | EAC

Van màng GEMÜ 656

• Media temperature :0 to 100 °C
• Ambient temperature:0 to 60 °C
• Operating pressure :0 to 7 bar
• Nominal sizes:DN 25 to 250
• Body configurations:2/2-way body
• Connection types:Flange
• Connection standards:ANSI | EN | ISO
• Body materials:EN-GJL-250, cast iron material | EN-GJS-400-18-LT | EN-GJS-400-18-LT, SG iron material | EN-GJS-500-7, ductile iron material
• Body lining:Butyl | Hard rubber | Soft rubber
• Diaphragm materials:CR | EPDM | IIR | NBR | NR
• Conformities:CRN | EAC

Van màng GEMÜ 671

• Media temperature :-10 to 80 °C
• Sterilization temperature:
• Ambient temperature:0 to 60 °C
• Operating pressure :0 to 10 bar
• Nominal sizes:DN 15 to 100
• Body configurations:2/2-way body
• Connection types:Clamp | Flange | Spigot | Threaded connection
• Connection standards:ANSI | ASME | BS | DIN | EN | ISO | JIS | NPT | SMS
• Body materials:1.4408, investment casting material | 1.4408, investment casting material, PFA lined | 1.4435 (316L), forged material | 1.4435 (BN2), forged material | 1.4435, investment casting material | 1.4539 (904L), forged material | CW617N, brass | EN-GJS-400-18-LT, SG iron material | EN-GJS-400-18-LT, SG iron material, PFA lined | EN-GJS-400-18-LT, SG iron material, PP lined
• Diaphragm materials:EPDM | FKM | PTFE/EPDM | PTFE/PVDF/EPDM
• Conformities:EAC | FDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004

Van màng GEMÜ 675

• Media temperature :-10 to 100 °C
• Ambient temperature:0 to 60 °C
• Operating pressure :0 to 10 bar
• Nominal sizes:DN 15 to 150
• Body configurations:2/2-way body
• Connection types:Flange | Threaded connection
• Connection standards:ANSI | BS | DIN | EN
• Body materials:EN-GJL-250, cast iron material | EN-GJS-400-18-LT, SG iron material | EN-GJS-400-18-LT, SG iron material with hard rubber lining | EN-GJS-400-18-LT, SG iron material, PFA lined | EN-GJS-400-18-LT, SG iron material, PP lined | EN-GJS-500-7, ductile iron material, PFA lined | EN-GJS-500-7, ductile iron material, PP lined
• Body lining:Hard rubber | PFA | PP
• Diaphragm materials:CR | EPDM | FKM | NBR | PTFE/EPDM | PTFE/FKM | PTFE/PVDF/EPDM
• Conformities:CRN | EAC | FDA | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

Van màng GEMÜ 687

• Media temperature:-20 to 120 °C
• Sterilization temperature:max. 150 °C
• Ambient temperature:-10 to 60 °C
• Operating pressure :0 to 10 bar
• Nominal sizes:DN 10 to 100
• Body configurations:2/2-way body | Tank valve body | T-body
• Connection types:Clamp | Flange | Spigot | Threaded connection
• Connection standards:ANSI | ASME | BS | DIN | EN | ISO | JIS | NPT | SMS
• Body materials:1.4408, investment casting material | 1.4408, investment casting material, PFA lined | 1.4435 (316L), forged material | 1.4435 (BN2), forged material | 1.4435, investment casting material | 1.4539 (904L), forged material | EN-GJS-400-18-LT (GGG 40.3), PFA lined | EN-GJS-400-18-LT (GGG 40.3), PP lined | EN-GJS-400-18-LT, hard rubber lined
• Body lining:Hard rubber | PFA | PP
• Diaphragm materials:EPDM | FKM | PTFE
• Conformities:3A | Belgaqua | CRN | EAC | FDA | FMEDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act) | USP

Van màng GEMÜ 695

• Media temperature :-10 to 80 °C
• Ambient temperature:0 to 60 °C
• Operating pressure :0 to 10 bar
• Nominal sizes:1/2" (DN 15) to 2 1/2" (DN 65)
• Body configurations:2/2-way body
• Connection types:Clamp | Flange | Spigot | Threaded connection
• Connection standards:ANSI | ASME | BS | DIN | EN | ISO | JIS | SMS
• Body materials:1.4408, investment casting material | 1.4408, investment casting material, PFA lined | 1.4435 (316L), forged material | 1.4435 (BN2), forged material | 1.4435, investment casting material | 1.4539 (904L), forged material | EN-GJS-400-18-LT, SG iron material | EN-GJS-400-18-LT, SG iron material with butyl lining | EN-GJS-400-18-LT, SG iron material with hard rubber lining | EN-GJS-400-18-LT, SG iron material with soft rubber lining | EN-GJS-400-18-LT, SG iron material, PFA lined | EN-GJS-400-18-LT, SG iron material, PP lined
• Diaphragm materials:EPDM | FKM | NBR | PTFE/EPDM | PTFE/FKM
• Conformities:Belgaqua | EAC | FDA | Oxygen | TA Luft (German Clean Air Act)